6
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Wiring
The illuminator is supplied with a terminated CAT 5 cable with a waterproof Ethernet
connector (supplied loose i.e. not fitted) and an auxiliary multi-core cable.
Option 1 – Power via PoE
Connect an Ethernet cable (category 5 or better) using the T-568B wiring standard
between the Power Sourcing Equipment (PSE) and the illuminator. Ensure that
the PSE is sufficiently rated to power the VARIO2 IPPoE device as follows:
The Factory Software version of the illuminator is shown by characters 4,5,6 in
the product serial number.
The CAT5 cable is both the power and data connection for the illuminator. The
maximum Ethernet cable length is 100m (328 ft) without boosting the signal.
Ensure you make a waterproof connection to the RJ45 as shown below. Ensure
the connector is waterproof and sealed after the connection is made.
To illuminator
RJ45-RJ45 connector
To Network
Model
PoE Requirement
VAR2-IPPoE-w4-1, i4-1, i4-1-C, i6-1
IEEE 802.3at ≥25.5W
VAR2-IPPoE-w8-1, i8-1, i8-1-C
Factory Software Version <2.5.0: 4-pair
PoE ≥51W
Factory Software version ≥2.5.x : IEEE
802.3bt or 4 pair PoE ≥51W
