UK/Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Toll Free: +1 888 505 8335
Example 4 : (Hybrid Lamps)
Switch 1
Switch 2
Switch 3
Switch 4
OFF
OFF
OFF
ON
With Lamp1 = White Light, Lamp2=InfraRed
Lamp2 (IR) is ON if photocell status is dark (or permanently ON if photocell is disabled)
Lamp1 (WL) is enabled if Cam1 O/P detects motion or by PIR via Aux Telemetry.
Turning ON of Lamp1 is conditional on its photocell, if it is enabled.
Cam1 day/night switching can be achieved via the Lamp1 photocell output.
Example 5 : (Thermal Imaging)
Switch 1
Switch 2
Switch 3
Switch 4
ON
ON
ON
OFF
With both Lamps = White Light, Cam1 = Thermal imaging, Cam2 = Colour IP type.
If lamp photocells are disabled, both Lamps are turned ON via Cam1 O/P on motion detection.
This action is detected by Cam2 I/P which can activate video capture streaming.
SW1 SW2 SW3 SW4 Function
0
0
0
0
0
0
0
1
With Lamp1 = White Light, Lamp2=InfraRed
Lamp2 (IR) is ON if photocell status is dark (or permanently ON if
photocell is disabled)
Lamp1 (WL) is enabled if Cam1 O/P detects motion or by PIR via Aux
Telemetry.
Turning ON of Lamp1 is conditional on its photocell, if it is enabled.
Cam1 day/night switching can be achieved via the Lamp1 photocell
output.
0
0
1
0
Both Lamps enabled by either Aux Telemetry, Cam1 O/P or Cam2 O/P
: Short Circuit=ON
Conditional on Photocell status
– Lamp ON in darkness (Unless Lamp
Pcell is optionally disabled)
Cameras (or a PIR) can switch the lamp ON when motion is detected.
Telemetry is a remote switch.
0
0
1
1
0
1
0
0
0
1
0
1
0
1
1
0
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
Common photocell status on Lamp1 and 2 (unless disabled) is
reported to both camera inputs.
Allows camera day/night switching and synchronised ON/OFF
switching as Example 1.
1
0
1
1
Common photocell status on Lamp1 and 2 (unless disabled) is
reported to both camera inputs.
Camera Day/Night switching is maintained but both Lamps are forced
ON in the dark state.
Camera output control and Aux Telemetry function are disabled.
1
1
0
0
