RAYTAC MDBT42Q-ATM, Manual

Page: 7 / 62

6
No. Command Description
(25) AT+PHYMODE1MBPS Set PHY mode at 1Mbps
(26) AT+PHYMODE2MBPS Set PHY mode at 2Mbps
(27) AT+WAKEUPLOW Set logic low at wake-up when in deep sleep
(28) AT+WAKEUPHIGH Set logic high at wake-up when in deep sleep
(29) AT+IDLETIMEtttt
Set idle time (Hex)
e.g. 0x001E (min. 30secs),
0x0258 (Max. 600secs)
0x0000 (forever)
(30) AT+SCANOLDTIMEtttt
Set time of scanning of paired device (Hex)
e.g. 0x001E (min. 30secs),
0x0258 (Max. 600secs)
0x0000 (forever)
(31) AT+SCANNEWTIMEtttt
Set time of scanning all devices (Hex)
e.g. 0x001E (min. 30secs),
0x0258 (Max. 600secs)
0x0000 (forever)
(32) AT+DCDCDIS Disable DC to DC converter
(33) AT+DCDCEN Enable DC to DC converter
(34) AT+CONNECTINTERVALMODE0
Set connection interval mode for Peripheral 20ms/40ms
usage (min. 20ms / Max. 75ms),
(35) AT+CONNECTINTERVALMODE1
Set connection interval mode for Peripheral 8ms/8ms
usage (min. 8ms / Max. 8ms)
(36) AT+IDLEPATTERNnnnnffff
Set LED idle pattern (Hex) , where
n = time when LED on, f = time when LED off
e.g. 0x0064 (min. 100ms)
0x1388 (Max. 5,000ms)
0x00000000 (off)
0xFFFFFFFF (on)
(37) AT+CONNECTPATTERNnnnnffff
Set LED connecting pattern (Hex) , where
n = time when LED on, f = time when LED off
e.g. 0x0064 (min. 100ms)
0x1388 (Max. 5,000ms)
0x00000000 (off)
0xFFFFFFFF (on)