RAYTAC MDBT42Q-ATM, Manual

Page: 13 / 62

12
No. Command Response
(17) AT?CONNECTPATTERN
00c80708 (default: Hex, 0.2sec on / 1.8sec off,
nnnn: 0x00c8, ffff: 0x0708)
(18) AT?SCANOLDPATTERN
03e803e8 (default: Hex, 1sec on / 1sec off,
nnnn: 0x03e8, ffff: 0x03e8)
(19) AT?SCANNEWPATTERN
00640064 (default: Hex, 0.1sec on / 0.1sec off,
nnnn: 0x0064, ffff: 0x0064)
(20) AT?SERIALNO
Display “ no data! ” string (default)
(21) AT?ADCVALUE Value varies from input voltage
(22) AT?RESPONSE
1 response en (default)
(0 = disable response; 1 = enable response)
(23) AT?RSSITHRESHOLD -51 (default: Ascii, nnn: -51)
(24) AT?BEACONINFO
0 beaconinfo dis (default)
(0 = disable print beacon info.; 1 = enable print beacon info.)
(25) AT?COMPANYID 004C (default: Hex , dddd: 0x004C)
(26) AT?BEACONUUID
0112233445566778899AABBCCDDEEFF0
(default: Hex , uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu:
0x0112233445566778899AABBCCDDEEFF0)
(27) AT?TXCHARACTERUUID 0003 (default: Hex , uuuu: 0x0003)
(28) AT?RXCHARACTERUUID 0002 (default: Hex , uuuu: 0x0002)
(29) AT?SERVICEUUID 0001 (default: Hex , uuuu: 0x0001)
(30) AT?BASEUUID
9ECADC240EE5A9E093F3A3B50000406E
(default: Hex , uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu:
0x9ECADC240EE5A9E093F3A3B50000406E)
(31) AT?ALLPARAMETERS Display value of all parameters, separated by "0x0d0x0a"