Dock WLAN LED
(Green) Connected to Wi-Fi.
(Green) Connected to Wi-Fi and transferring
data.
(Red) Unable to connect to Wi-Fi / No signal.
(Off) Wi-Fi switched off.
NMEA LED
(Green) NMEA connected / OK.
(Red) NMEA connected no data.
(Red) NMEA not connected.
SeaTalkhs network (1 / 2 / 3 / 4) LEDs
(White) Port connected 1,000 Mbits/s.
(White) Transferring data 1,000 Mbits/s.
(Amber) Port connected 10/100 Mbits/s.
(Amber) Transferring data 10/100 Mbits/s.
Power LED
(Green) Powered up / Ok.
(Green) GNSS (GPS) no fix / Initializing.
(Amber) Software update in progress.
(Red) Fault.
7.3 Power up troubleshooting
Before troubleshooting problems with your power connection, ensure that
you have followed the power connection guidance provided in the product’s
installation instructions and performed a power cycle/reboot of the device.
The troubleshooting information below can be used if you are experiencing
problems with powering up your product.
Blown fuse / tripped breaker
1.
Check the fuse, located inline with the power cable. Ensure that it has
the correct rating (refer to
Connections
chapter), as an under-rated fuse
can affect the power supplied to the product. If the fuse has blown,
replace with a new fuse.
63
