• Where an installation requires multiple ferrites to be added to a cable,
additional cable clips should be used to prevent stress on the connectors
due to the extra weight of the cable.
Connections to other equipment
Requirement for ferrites on non-Raymarine cables.
If your product is to be connected to other equipment using a cable not
supplied by Raymarine, a suppression ferrite MUST always be attached to
the end of the cable nearest to the Raymarine product.
5-in-1 antenna location requirements
The supplied 5-in-1 antenna must be mounted in a location that provides a
clear unobstructed view of the sky.
Ensure that the selected mounting location is:
• Open and clear of any obstructions (such as masts, search lights, or other
structures) that could block line-of-sight to the sky.
• As low as possible, to keep the antenna as stable as possible. The more
stable the antenna, the more effectively it will track satellites and provide
stable data.
• As far as possible (at least 1 m (3 ft)) from other antennas and electronic
equipment.
Do NOT mount the antenna:
• In any area where it could be stepped on or tripped over.
• Up a mast. This will cause the antenna to swing and give significant errors
in position data.
• In the direct path of a Radar beam.
4.3
YachtSense ™
Link product dimensions
•
A
= 87.80 mm (3.46 in)
•
B
= 108.40 mm (4.27 in)
•
C
= 19.50 mm (0.78 in)
•
D
= 108.20 mm (4.26 in)
•
E
= 141.00 mm (5.55 in)
•
F
= 162.20 mm (6.39 in)
•
G
= 29.50 mm (1.16 in)
•
H
= 6.50 mm (0.26 in)
•
I
= 80.00 mm (3.15 in)
28
