Raymarine Satellite TV Antenna Systems
Edit Satellite Information
It is possible to modify the existing satellite information and input
new satellite information into the ACU as well. However, this
mode is not recommended for novice satellite service users.
1. Press YES to enter setup mode.
2. Press NEXT twice to enter edit satel-
lite info mode.
3. Press YES to edit satellite info.
4. Set the satellite name.
PREV - Shows previous satellite name.
SELECT - Select the displayed satellite
for editing.
NEXT - Shows next satellite name.
Press ENTER to move to next screen.
SETUP MODE ?
SET SAT PAIR ?
EDIT SAT INFO ?
SAT NAME : DTV101
YES
PREV
PREV
PREV
NO
NEXT
NEXT
NEXT
YES
YES
SELECT
X2
5. Input the satellite name.
+ increases the value. - decreases the value.
Change the underscored digit using the
+/- buttons.
Press INPUT to accept the value and move
to next digit.
Press BACK to move to previous digit.
6. Press ENTER to move to next screen.
Press BACK to return to previous screen.
7. Input the satellite position.
+ increases the value. - decreases the value.
Change the underscored digit using the
+/- buttons.
Press INPUT to accept the value and move
to next digit.
Press BACK to move to previous digit.
SAT NAME : DTV101
SAT NAME : DTV101
LONGITUDE 124.00 E
-
-
-
+
+
+
INPUT
INPUT
INPUT
8. Input the tracking frequency (MHz) and
symbol rate (KHz) for vertical low band.
VER LOW 12598 21096
-
+
INPUT
