26
ST5000 Plus SailPilot Owner’s Handbook
Waypoint advance
NEXT WPT?
The Waypoint Advance alarm sounds whenever the target waypoint
number changes, which occurs in the following circumstances:
• Automatic acquisition is selected by pressing
track
from Auto
• Waypoint advance is requested by pressing
track
for 1 second in
Track mode (SeaTalk Navigators only)
• When the vessel arrives at the target waypoint and the navigator
accepts the next waypoint
• When the Man Overboard (MOB) function is activated in Track
mode.
When the alarm sounds, the pilot continues on its current heading, but
displays the bearing to the next waypoint and the direction in which the
boat will turn to take up that bearing.
Check that it is safe to turn onto the new track, and press
track
to
accept the waypoint advance.
Alternatively, to cancel the alarm without accepting the waypoint
advance, press
standby
to return to hand steering, or
auto
to return to
Auto mode.
Note: The waypoint advance will only operate on pilots receiving
valid bearing to waypoint and waypoint number information.
Low battery
LOW BATT
The Low Battery alarm sounds when the supply voltage drops below
10 V (±0.5 V).
Press
standby
to clear the alarm and return to hand steering.
Start the engine to recharge the battery.
Watch alarm
WATCH
The Watch alarm is activated in Watch mode when the timer reaches
4 minutes. It is not available from Standby mode.
136_3c03.p65
14/06/99, 10:16
26
Summary of Contents for ST5000 Plus
