4-6 Operation with Full Function Handset
"
8/M-CALL key
This key inputs the number 8. When an alphanumeric response is
appropriate, each press of this key alternately inputs the characters
8, T, U, then V. Pressing the FUNC key followed by the 8/M-CALL
key starts Multi-Call mode. If this key combination is pressed during
Multi-Call mode, the operation returns to normal mode.
#
9/ 1/25 key
This key inputs the number 9. When an alphanumeric response is
appropriate, each press of this key alternately inputs the characters
9, W, X, Y, and then Z. Pressing the FUNC key followed by the 9/ 1/
25 key alternates the transmission power between 1W and 25W.
$
* key
This key inputs an asterisk (*).
Note:
The
HAIL
label over this key does not pertain to the RAY215E.
%
0/IC key
This key inputs the number 0. Pressing the FUNC key followed by
the 0/IC key starts Intercom mode, which enables conversation
between the Minimum Function Handset connected to the port on
the front of the base station and a Full Function Handset connected
to the port on the rear of the base station. Pressing the FUNC key
followed by this key during Intercom mode returns operation to
normal mode.
&
# key
This key inputs the # character.
Note:
The
FOG
label over this key does not pertain to the RAY215E.
'
ENT key
This key performs the Enter function. It is used to confirm and
implement an input action. Pressing the FUNC key followed by the
ENT/MENU key initiates the Menu mode.
CLR key
Depending on when it is used, this key exits the current mode and
reverts to the last used mode or normal operation. This key also can
be used to clear any alphanumeric inputs one at a time in the order
that they were entered. Pressing the FUNC key followed by CLR/
LOG key initiates the Digital Selective Calling (DSC) Log. Pressing
the key during logging returns operation to normal mode.
Summary of Contents for Ray215e
