Raymarine i70, Operation Instructions Manual

Page: 80 / 104

11.1 Setup menu
The Set-up menu provides settings to configure the unit.
•
Transducer Set-up — Set up and calibrate transducers as detailed in Transducer calibration
chapter: p.23 — Transducer calibration
• User Preferences — Configure the following options:
– Time & Date — Refer to: p.82 — Time and date
– Units — Refer to: p.82 — Units of measure
– Language — Refer to: p.82 — User interface languages
– Boat Type — Refer to: p.83 — Boat types
– Boat Details — Refer to: p.83 — Boat details
– Variation — Refer to: p.83 — Variation
– Key Beep — Refer to: p.83 — Key beep
• System set up — Configure network groups and data sources. The following options are available:
– Network group — Refer to: p.84 — Network group
– Brightness/Color Group — Refer to: p.84 — Brightness and color group
– Data Sources — Refer to: p.84 — Data sources
– About System Set Up — Provides information about the System set-up menu.
• Simulator — Enables and disables simulator mode. The simulator produces simulated data to
enable you to practice operating the display.
Note: The simulator will not produce simulated data if live data sources are present on the
SeaTalkng ® network.
• Factory reset — Delete user settings and restore the display to its factory default settings.
• Diagnostics — Information About the display, devices connected to the network and the
diagnostics self test. The following options are available:
– About display — View hardware and software details for your display.
– About system — Allows you to search the SeaTalkng ® network and shows information about
the products found.
– Self Test — The product has a built in self test which can help to diagnose faults. The following
tests are performed during a self test:
♦ Memory test
♦ Button test
♦ Display test
♦ Buzzer test
♦ Illumination test
11.2 Transducer set-up menu
The Transducer Set-up menu enables calibration of connected transducers.
The Transducer set-up menu is accessed from the Set-up menu: Menu > Set-up > Transducer Set-up
iTC-5
The iTC-5 menu enables setup and calibration of transducers connected using an iTC-5. The
following calibration options are available when the relevant transducer is connected:
•
Depth — For depth calibration details refer to: p.24 — Depth calibration
• Speed — For speed calibration details refer to: p.25 — Speed calibration
• Wind — For wind calibration details refer to: p.34 — Wind calibration
• Rudder reference — For rudder reference calibration details refer to:
p.38 — Rudder reference calibration
• Compass — For compass calibration details refer to: p.39 — Compass calibration
80