Raymarine i70, Operation Instructions Manual

Page: 83 / 104

Boat types
The Boat Type menu allows you to select a boat type that is similar to your vessel The boar type
selection determines the default setup of the display including which default favorite pages are
available.
The following options are available:
Race Sail Sail Cruiser Catamaran Workboat
RIB Outboard Speedboat Inboard Speedboat Power Cruiser 1 (<12kts)
Power Cruiser 2
(<30kts) Power Cruiser 3
(>30kts) Sport Fishing Pro Fishing
Boat details
The Boat Details menu allows you to configure engine, battery and fuel related settings.
The following options are available:
• Number of engines — Configure the display for 1 to 5 engines.
• Number of batteries — Configure the display for 1 to 16 batteries.
• Number of fuel tanks — Configure the display for 1 to 5 fuel tanks.
• Max RPM range — Configure the Maximum RPM for your engines This will be used on engine
RPM dials.
• RPM Red Zone — Configure the start of the RPM red zone for your engines This will be used
on engine RPM dials.
Note:
If Max RPM range and / or RPM Red Zone are set to Auto then values transmitted by the engine
will be used, otherwise the default range will be used.
Variation
Variations is the local difference between True north which does not change and Magnetic north
which changes slightly each year Cartography generally uses True north and Magnetic north is the
direction a magnetic compass points. Variation changes depending on your geographic location and
date. The
Variation menu provides options to compensate for variation.
The following options are available:
• Variation mode — Variation mode can be set to the following:
– On — With variation switched on you can set the amount of variation using the Variation range
option.
– Off — With variation switched off variation will be used.
– Slave — When networked to another device (e.g.: an MFD or pilot controller) that provides
magnetic variation the display will automatically switch to slave mode and use the variation
provided by that device.
• Variation range — When Variation mode is switched on your magnetic heading readings will be
adjusted by the amount specified
Key beep
By default every time a button is pressed the display will beep. The beep can be enabled and
disable using the Key beep option.
Setup menu
83