Raymarine i50 Depth, Installation And Operation Instructions Manual

Page: 39 / 90

6.9 Using the depth pages
To cycle through the depth pages follow the steps
below.
1 0
15
20
25
30
35
40
45
50
55
60 5
8 1 0
15
20
25
30
35
40
45
50
55
60 5
8
D12532-2
1 0
15
20
25
30
35
40
45
50
55
60 5
3 1 0
15
20
25
30
35
40
45
50
55
60 5
3
1
3 2
D e pth
D e pth
D e pth
R e s e t R e s e t
1. Current Depth page
2. * Minimum Depth page
3. * Maximum Depth page
Note: * These pages are temporary pages and
will revert back to the Current Depth page after
8 seconds of inactivity.
1. Use the Depth button to cycle through the
available depth pages.
2. From the Minimum Depth or Maximum Depth
page, press and hold the Reset button for
approximately 3 seconds to reset the reading.
6.10 Viewing the depth offset
To view the offset value currently applied to your
instrument follow the steps below.
During normal operation:
1. Press the
Offset button to display the Depth
offset page.
The display shows the value of the offset applied
and identifies:
• If a positive offset value is applied W/L is
displayed to denote a waterline offset.
• If a negative offset value is applied KEEL is
displayed to denote a keel offset.
• If a zero offset value is applied OFFSET is
displayed to denote that there is a zero offset
from the transducer.
Note: Depth offset information is only available
on units set as data masters (see Data master
section for details.
i50 Depth
39