Raymarine HSB Chartplotter, User Manual

Page: 63 / 154

46 HSB Series Chartplotter
2. Press the MAKE NEW WAYPOINT softkey.
The waypoint is placed at the current vessel position, or if not
available, the cursor position. It is added to the Waypoint List and
named with the next available number.
To return to the default softkey display, press ENTER twice.
Selecting a Waypoint
Positioning the cursor over a waypoint selects that waypoint and
accesses the waypoint soft keys. These keys enable you to go to
(described in Section 3.4), edit (symbol, name, position), erase or move
the waypoint.
Selecting a waypoint from the List allows you to go to and edit (symbol,
name, position, erase) the waypoint. The Waypoint List also provides
options to make a new waypoint and transfer waypoints.
➤
To select a waypoint using the cursor:
1. Move the cursor over the waypoint, until the letters WPT are
displayed.
The Waypoint Data box (see Waypoint Data Display below) and the
following soft keys are displayed:
D4163-1
GOTO
WAYPOINT
EDIT
WAYPOINT
ERASE
WAYPOINT
MOVE
WAYPOINT
The selected waypoint can be edited via these soft keys.
➤
To select a waypoint using the Waypoint List:
1. Press MARKS, followed by the WAYPOINT LIST soft key.
The Waypoint List and associated soft keys are displayed.
The list details all waypoints in alpha-numeric order. The selected
waypoint is indicated by the grey selection bar; its position, bearing
and range are provided.
3. Use the trackpad to move the selection bar up and down the list to
highlight the required waypoint.
The selected waypoint can be edited via the soft keys displayed.
MAKE NEW
WAYPOINT
WAYPOINT
LIST
Selecting a
Waypoint