Raymarine H6 Owner'S Manual Download Page 37 | Manualshive

Page: 37 / 192

Raymarine H6 Owner'S Manual Download Page 37

Using the chart plotter

23

You can change the range by clicking the softkeys in the tool box.

Click this button to move the range OUT and see a larger
area

Click this button to move the range IN and see a smaller
area.

Finding your boat on the chart

Your boat is displayed using a boat shaped icon.

To find your current position on the chart:

Click

Find Vessel in the Tool box.

The chart will automatically pan and the boat’s position will be centered on the
screen.

The chart will remain centered until you click the screen. The chart will then re-
center on the cursor’s location.

Choosing a chart type

You choose the type of chart you want to display using the chart controls.

To select the chart type to be displayed:

Click the button for the type of chart you want to be displayed.

If there is no chart type enabled, or charts are unavailable at the level of zoom that
has been selected, only an aquamarine colored background will be visible. You

or use:

Trackball left button

Click and hold the left button. As you drag the
cursor, the selected area will be highlighted in gray.
Release the button and the selected area will be
zoomed in.

Trackball right button

When you right click on a chart, the right click menu
is displayed. Select

Range In

or

Range Out

.

D7240_1

D7241_1

81238_1.book Page 23 Thursday, September 16, 2004 2:49 PM

«
...
35
36
37
38
39
...
»

Summary of Contents for H6

































































































































































































Reviews:

No comments