Raymar 3460, User Manual, Page: 45 / 171

3460 Fast’R
2-3
Leased-Line Synchronous Operation
Set up a modem for leased line operation with a synchronous protocol as
follows. Using a special remote control program to operate a host
computer or access a host network usually requires a synchronous
protocol. Communications-program commands vary, so use this
procedure only as a guide.
Basic Setup for Sync Leased-Line Operation
Step Stage
1.
Run your communications program. Assign the modem to one of
the computer’s serial communications (COM) ports.
2.
The modem is pre-set to Option Set 1 . To set it to Option Set 2 , run
your communications program, and issue the ATZ2 command.
3.
For information on setting custom configuration options, refer to
Chapter 3, Advanced Modem Setup.