
3460 Fast’R
B-4
Z
Load Option Set Into RAM
The new option set takes effect immediately.
Z0, Z1
=Load Option Set 1
Z2
=Load Option Set 2
*
Commands
*
AC
Automatic Call Unit (ACU) Protocol
0
=None (use this option with leased line)
When configuring the modem for V.25bis synchronous
direct-dial operation (DTR Control=Tail or 108.1,
AT&D4 or AT&D5), you must use this option .
1
=AT ACU
2
=V.25bis ACU
*
AP
Adaptive Rate
0
=Disable
1
=Enable. The modem monitors telephone line signal
quality and negotiates the highest possible rate for a
modem’s modulation mode. You must enable Retrain
(AT
*
RT) to use Adaptive Rate.
*
AR
V.34 Asymmetric Rate
0
=Disable
1
=Enable
*
AS
Answer in Restoral
0
=LL Fail
1
=Always
AT Command Set
(continued)
Command
Option
Description
The characters
AT
or
at
precede all commands except:
+++
,
#####
, and
A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the
3460 Fast’R Reference Guide
(TEL–T0022).
Default (pre-set) options are underlined.
Summary of Contents for 3460
