0049-1800-xxx 326X V.34, V.34-SDC and V.32bis Series Modem – USER’S GUIDE 02/23/2010
Rev. A
Page 46
of
205
PREPARING FOR OPERATION
The procedures in this chapter assume that you are installing the modem for the first time. If you want to
reinstall the modem, perform the procedure(s) below to reinitialize the modem’s memory.
NOTE:
Reinitializing modem memory sets modem parameter options back to factory defaults (Option Set 1) and
deletes stored telephone numbers from memory.
Reinitializing Memory from the Front Panel
1)
Press
twice. Press
until the modem displays
Reinit Memory
.
2)
Press . The modem displays
Reinit Mem
?
3)
Press to reinitialize modem memory.
Reinitializing Memory Using the AT&F Command
You can also reinitialize memory by entering
AT&F<CR>
from the terminal.
CONFIGURATION OPTION SETS
This section discusses the modem’s preconfigured option sets, in three parts:
•
What is an Option Set?
•
How to Configure an Option Set
•
Option Set Defaults – 326X V.32bis, 326X
FAST
V.34, and 326X
FAST
-SDC
What is an Option Set?
Option sets are complete configurations, each tailored for an application and stored in memory. Option
sets get the modem working quickly.
If an option set does not exactly suit your needs, pick the one that most closely matches your
application, modify its settings, and save the changes in the modem’s nonvolatile memory (refer to
Appendix A).
Table 4-1 shows V.32bis and V.34bis option sets. Table 4-2 shows SDC option sets.
