0049-1800-xxx 326X V.34, V.34-SDC and V.32bis Series Modem – USER’S GUIDE 02/23/2010
Rev. A
Page 180
of
205
To prevent circuit overload, each piece of equipment is assigned a Load Number (LN), which denotes
the percentage of the total load used by the device in a telephone loop. This equipment has a load
number of 4. You may use any combination of devices on a loop, subject only to the requirement that
the total of the load numbers of all the devices does not exceed 100.
The standard connecting arrangement codes for the equipment are as follows:
CA02B, CA11A, CA40A, CA41A, and CA45A.
Canadian Emissions Statement
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigencies du Règlement sur le materiél
brouilleur du Canada.
Rear Panel Pinouts
This section provides the rear panel pinouts for the 3265/3266 Modem, cross-referenced to the pinouts
for the telco jacks supported in Canada.
3265 Modem
Table C-12 describes dial line connector pinouts for RJ jack types.
Table C-12.
DIAL LINE Connector Pinouts for Jack Operation
