0049-1800-xxx 326X V.34, V.34-SDC and V.32bis Series Modem – USER’S GUIDE 02/23/2010
Rev. A
Page 145
of
205
ITU RECOMMENDATION V.35 MODEM-TO-COMPUTER INTERFACE
For compatibility with DTEs operating with a V.35 interface, the 326X
FAST
-SDC Series Modem supports an
optional ITU Recommendation V.35 Modem-to-Computer interface. Connection is made through the
modem’s DTE port (see Figure B-1).
NOTE
: The 326X
FAST
-SDC Series Modem with a V.35 interface is currently available in the U.S.A. and
Canada.
Caution
The 326XFAST-SDC Series Modem, if ordered with ITU’s V.35 Recommendation,
supports connection to external equipment also operating with a V.35 electrical
interface. If your DTE does not have a V.35 interface,
do not, under any
circumstances
, connect the modem to a non-V.35 device. If you make such a
connection, you may seriously damage the modem. Raymar-Telenetics makes no
guarantee of the equipment’s integrity if you do not ensure that compatible interfaces
are used. If your DTE does not have a V.35 interface, use an external converter cable.
NOTES
:
1)
The modem is configured at the factory for an EIA/TIA 232-D interface or ITU
rate V.35, and is shipped according to what you specify. Both interfaces are not
available in the same unit.
2)
When operating with the V.35 interface, switch S1 must be set to the off (up)
position.
