0049-1800-xxx 326X V.34, V.34-SDC and V.32bis Series Modem – USER’S GUIDE 02/23/2010
Rev. A
Page 17
of
205
CHAPTER TWO – Installing the Modem
Introduction
This chapter describes how to install and connect a 326X Series Modem. In this chapter, you:
•
Unpack the modem
•
Choose an appropriate site to install the modem
•
Familiarize yourself with the modem’s rear panel and connectors
•
Connect the modem to a PC or other data terminal equipment (DTE)
•
Connect the modem to a telephone handset (if appropriate) and to the dial/leased telephone line jacks
•
Attach ferrite cylinders, if necessary
•
Connect the modem to a Network Management System (NMS), if appropriate
•
Turn on the modem and run the unit’s automatic self-test
IMPORTANT
:
Telephone company and governmental regulations vary by country. Your modem’s rear panel
layout and cabling may vary from that shown in this guide.
Refer to Appendix C for a description of the modem rear panel and cabling; important safety guidelines for
connecting the modem in your country; and regulatory restrictions and requirements.
To order cables, refer to Appendix B; then contact your Raymar-Telenetics sales representative for ordering
information.
NOTE
: If you are installing a 326X Series Modem card, refer to the addendum,
326X Series Modem Cards
,
shipped with your modem’s backplane.