Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C4000XZ~12000XZ
10
RFL-C8000W
QD
Type A end cap
(with protective
windows )
Type A end cap
(with protective windows )
RFL-C10000W
QD
Type A end cap
(with protective
windows )
Type A end cap
(with protective windows )
RFL-C12000W
QD
Type A end cap
(with protective
windows )
Type A end cap
(with protective windows )
Note: According to the difference of the protective end cap of the cable in the actual use of the customer,
some models need to replace the protective end cap. Please refer to the " Cleaning Instructions for the
Output Optical Cable Before Installation " to clean the output optical cable and the protective end cap.
Figure 8 Schematic diagram of the protective end cap of the optical cable
3.3.2 Pre-installation cleaning instructions for output cables
a) Preparation tools
Cleaning agent: absolute ethanol, or isopropyl alcohol.
Cleaning tools: cleaning cotton swabs, dust-free paper, compressed air bottles, etc.
b) Steps
clean workbench should be turned on for at least 5 minutes , and the output optical cable
should be taken out of the black packaging box
