Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide
RFL-C2000S-HP /RFL-C3000S-HP /RFL-C4000S-HP/RFL-C6000S-HP
43
4.10 Laser power slow rise and fall mode
Figure 20 Slow rise and fall parameter menu
In the slow rise and fall setting, if any parameter is not 0, the laser will automatically enter
the rise and fall mode, and if all the rise and fall parameters are 0, the rise and fall mode will be
automatically turned off.
After the slow rise and fall mode is turned on, the laser performs the ramp-up program to
the target power according to the set ramp-up time after the start of laser emission, and executes
the ramp-down program to power 0 according to the set ramp-down time after turning off the
laser.
4.11 Programming Mode (Waveform Editing)
4.11.1 Programming mode enabling method
In programming mode, the laser has waveform editing, storage and recall functions.
