Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-C2000S-HP-RFL-C6000S-HP
6
4: CE Certification
5: Laser Label
6: Laser Radiation Hazard
7:Strong electric Hazard
1.4 Optical Safety
Any dust on the end of the collimator assembly can burn the lens.
CAUTION:
DO NOT emit laser when the protective
cap is not removed, otherwise the lens or crystal will be
damaged.
1.5 Electrical Safety
a) Make sure the product is firmly grounded through the PE line of the AC power cord
WARNING:
Any interruption from the protective earth
will electrify the enclosure, which may result in personal
injury for operators.
b) Make sure that the correct voltage of the DC power source is used.
Wrong wiring mode or power supply voltage will cause an
irrecoverable damage to the laser device.
1.6 Other Safety Rules
a) Do not directly look the laser fiber delivery cable connector when laser emitting.
b) Do not use fiber lasers in dark environment.
c) If this device is used in a manner not specified in this document, the protectionprovided
by the device may be impaired and the warranty will be voided.
d) There are no user serviceable parts, equipment or assemblies inside the product. All
service and maintenance shall be performed by Raycus. In order to prevent electric
shock, please do not break the seal or uncover the shield. Failure to comply with this
instruction will void the warranty.
