Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide
RFL-C2000S-HP /RFL-C3000S-HP /RFL-C4000S-HP/RFL-C6000S-HP
36
Figure 13 “Authorization”menu
4.7.6 Mode Selection
Mode selection is used to select the mode of the current software, including observation
mode, control mode, diagnosis mode and debugging mode.
Observation mode: When the software is opened, the observation mode is selected by
default. The most commonly used and concerned information is displayed on the software menu.
The observation mode can be used without a password.
Control mode: The control mode adds the function of the operable control menu on the
basis of the observation mode. A password is required to enter the control mode. The initial
password is 81338818 (the password can be modified).
Debugging mode: On the basis of the diagnostic mode, the debugging mode adds a
parameter setting menu, an encryption mode that only Raycus engineers can enter.
Diagnosis mode: When the laser fails and needs to be diagnosed remotely, or the integrator
needs to know more status information of the laser, it can enter the diagnosis mode. The
diagnosis mode adds the status and alarm information of the main control module, slave control
module, ACDC module and DCDC module on the basis of the observation mode. A password is
