Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
33
③
The communication sends “EEC”, or the host computer software clicks the
button
；
④
The communication sends “ELE”, or the host computer software clicks the
button
；
⑤
XP1-A1 is high level, XP1-A6 is low level or floating;
⑥
XP1-A1 is high level, XP1-A3 is high level;
⑦
XP1-A1 is high level, XP1-A8~A14 are low level or floating;
⑧
XP1-A1 is high level, XP1-A6 is high level
⑨
XP1-A1 is high level, XP1-A3 is low level or floating
⑩
XP1-A1 is high level, not all XP1-A8~A14 are low level;
⑪
Communication
send
“EMON”
or
the
host
computer
software
click
the
“ON” button to emitting the laser;
The
communication
sends
"EMOFF"
or
the
host
computer
software
clicks
the
“OFF” button to turn off the laser;
⑫
The communication sends “ABN” or the host computer software clicks the
button to
output guide laser
；
Communication send “ABF” or the host computer software click the
button to turn
off the guide laser
；
⑬
Communication sends “SDC XX” to set the power percentage, XX represents the power percentage,
or the host computer software clicks the
button
；
5.1
ON Mode
In“ON” mode, users can set different operating modes by using the Raycus Laser Control System
(RLCS) or using a direct communication command method, which can be memorized by the laser source
even after powering off.
