Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
58
Figure 51 Laser alarmtypedisplayarea interface
8.6
Ring Light Parameters Setting
Click the Ring Spot tab to enter the Ring Spot Settings page, as shown in Figure 52 below.The power
bar shows the maximum power and current set power of the laser, the center power bar shows the maximum
power and current set power of the laser center light, and the ring power bar shows the maximum power
and current set power of the laser ring light.The current power of the laser is calculated automatically
according to the parameters set by the center light and ring light. Users can set the ratio of the center light
to the ring light according to their needs (click on (±) or drag the slider bar), and then synthesize the light
output parameters set by the main interface to get the desired ring laser output.Take the 6kW laser as an
example, if the center power is 71%, ring power is 56% (that is, the center power is 4000*0.71=2840W,
ring power is 2000*0.56=1120W), then the total power output of the laser is 3960W (that is, 66% of the
maximum power of the laser) If the power of the light output parameter is 50% in the main interface, then
the actual light output power needs to be *50% again, that is, the actual light output power is 1980W, with
the center light accounting for 1420W and the ring light for 660W.
Figure 52 Ring light parameters setting page
