Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
36
6
Laser Wiring Mode and Operation Steps
6.1
Internal Control in ON Mode
Figure 21
Key switch at “ON” position software mode wiring diagram
Operation method:
a)
Turn the knob switch on the rear panel to “ON”;
b)
Turn the key switch to “ON”;
c)
Open the Raycus Laser Control System;
d)
Click the guide laser “ON” button to view the guide laser;
e)
Turn off “AD” mode and turn off external control mode; (this mode can be memorized when
power off)
f)
Click the main power “ON”;
g)
Waiting for “Ready”;
h)
Set laser emission parameters;
i)
Click the laser “ON”.
6.2
Laser Operating in External Control Mode
Figure 22
Wiring diagram of powerinternal and external control of laser emission by MODE
