Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C3000XZ~RFL-C12000XZ
56
8.3.6
Laser Emission Parameters Read the Settings Area
Laser emission parameter setting interface is as Figure 47. The emission parameter setting is not valid
when AD mode is on.
Figure 47 Laser emission parameter settingarea display interface
The power is invalid when the AD mode is turned on;
The relationship between the frequency, duty cycle and MOD of the laser emission parameters when
the laser is externally controlled;
When the duty cycle is 100%, the actual laser emission is strictly synchronized with the external MOD
signal, and the default duty cycle is 100% after power-on.
Figure 48 The output waveform of the laser when the internal pulse duty cycle is 100%
When the duty cycle is less than 100%, the actual laser emission is equal to the phase sum of the
external MOD signal and the internal frequency.
