Raven RoGator 64 Series, Installation Manual

Page: 20 / 80

C
HAPTER
3
16 RoGator 64/74/86/SS Series AutoBoom Installation Manual
5. Connect the 3/4” end of the installed hydraulic hose to the fitting installed in port LC of the AutoBoom valve.
6. Disconnect the right up hose from the machine’s hydraulic valve.
7. Install 1-1/16” JIC M/M/F swivel run tee fitting (P/N 333-0012-109) in the open right up port of the machine’s
hydraulic valve.
8. Connect the machine’s right up hose to the opposite end of the installed tee fitting.
9. Install the 1-1/16” end of the supplied hydraulic hose (P/N 214-1000-298) on the 90° end of the installed tee
fitting.
10. Connect the 3/4” end of the installed hydraulic hose to the fitting installed in port RC of the AutoBoom valve.
INSTALL LEFT AND RIGHT DOWN HOSES
FIGURE 6. Left and Right Hoses Installed
1. Disconnect the machine’s left down hose from the machine’s hydraulic valve.
2. Install a 9/16” JIC M/M/F swivel run tee fitting (P/N 333-0012-043) in the left down port of the machine’s
hydraulic valve.
3. Connect the machine’s down hose to the opposite end of the installed tee fitting.
4. Install the supplied hydraulic hose (P/N 214-1000-229) to the remaining branch of the installed tee fitting.
5. Connect the other end of the installed hydraulic hose to the fitting installed in port LF CYL RTN of the
AutoBoom valve.
6. Disconnect the machine’s right down hose from the machine’s hydraulic valve.
7. Install a 9/16” JIC M/M/F swivel run tee fitting (P/N 333-0012-043) in the right down port of the machine’s
hydraulic valve.
8. Connect the machine’s down hose to the opposite end of the installed tee fitting.
9. Install the supplied hydraulic hose (P/N 214-1000-233) to the remaining branch of the installed tee fitting.
10. Connect other end of the installed hydraulic hose to the fitting installed in port RT CYL RTN of the AutoBoom
valve.