3 2
AccuBoom Setup
To setup the Accuboom control, touch the ‘AccuBoom Setup’ button. The
Accuboom Setup screen displays.
Touch the right or left arrows
to adjust
the timing for the different features. These features are defined as follows:
•
Turn Off Percent
- The percentage of the boom that is over a
previously applied area before it turns off. It is recommened that this
number be less than 90%, otherwise the boom may turn on when not
desired.
•
Turn On Look Ahead Seconds
- When the boom is off, this is the
time (in seconds) that it takes the boom to actually start applying
when turned on.
•
Turn Off Look Ahead Seconds
- When the boom is on, this is the
time (in seconds) that it takes the boom to stop applying when turned
off.
•
On-Override Seconds
- The time the boom will stay on when the
override is pressed from the guidance page.
1.
Touch the ‘
Booms
’ button to display the AccuBoom Boom Selection
Screen. From this screen, you can choose which booms you want to
control with AccuBoom.
