1 5
7.
When you get to the end of your pass and turn the vehicle, Envizio Plus
will detect the nearest area that you mapped and use this as your guid-
ance on the next swath line.
Setting the Pivot Pattern
1.
From the Home screen, touch ‘
Start Guidance
’. Then select ‘
Pivot
’ as
your pattern.
2.
Touch ‘
OK’
to proceed with the system generated file name, or touch
‘Change Name’ to type in a name for the file.
3.
If you are using a CAN system, the Start Job Options screen displays.
Select if you will be using AccuBoom (and if using a spray zone map)
or AutoBoom for the job, then press
OK
to start the job.
