![background image](http://html.mh-extra.com/html/raven/dcs-700/dcs-700_installation-and-service-manual_789028037.webp)
33
MISCELLANEOUS SCREENS
DISPLAY SMOOTHING ON/OFF
a)
GRAN display will show "MiSC". LIQ display will show "diSP". DATA display
will show "on".
b)
Depressing
steps the DATA display between "on" and "oFF". A value
of "on" means smoothing is enabled; a value of "oFF" means smoothing is
disabled, therefore the actual granular and liquid rates will be displayed
at all times. The percent smoothing is determined by the third digit of
the GRAN VALVE CAL or LIQ VALVE CAL value.
c)
Depress
to advance to MANUAL CONTROL ON/OFF.
MANUAL CONTROL ON/OFF
a)
GRAN display will show "MiSC". LIQ display will show "MAn". DATA display
will show "oFF".
b)
Depressing
steps the DATA display between "on" and "oFF". A value
of "on" enables manual control when the key switch is in the vertical
position, a value of "oFF" disables manual control when key switch is in
the vertical position.
c)
Depress
to advance to SPINNER CONTROL ON/OFF.
SPINNER CONTROL ON/OFF
a)
GRAN display will show "MiSC". LIQ display will show "SPin". DATA
display will show "oFF".
b)
Depressing
steps the DATA display between "on" and oFF". A value
of "on" means spinner is on whenever MASTER is ON; a value of "oFF" means
spinner goes on and off when granular bed/auger is on and off.
NOTE: Spinner must be "on" to calibrate spinner offsets.
c)
Depress
to advance to DISPLAY SMOOTHING.
d)
Depress
to advance to OFFSET SCREENS.
Summary of Contents for DCS 700
Page 1: ...DCS 700 INSTALLATION AND SERVICE MANUAL ...
Page 3: ......
Page 4: ...Manual Rev B DCS 700 063 0171 711 7 99 016 0159 775 ...
Page 61: ...NOTES ...