52
APPENDIX 13
DCS 700 DATA MENU REFERENCE GUIDE
DATA MENU
The DCS 700 has multiple features that are located in the DATA MENU key. The
following are brief descriptions of features available under the DATA MENU and the
default settings for these features:
DISPLAY SCREENS
GRAN
LIQ
DATA
FEATURE and DESCRIPTION
SERIAL PORT SCREENS
SPr
Prn
CAL/bEGn/End
CONSOLE DATA PRINTOUT
Sends data through serial port to computer
or optional printer to print day begin and
day end pages. Calibration numbers can also
be printed.
SPrt
0
TRUCK NUMBER
Allows user to enter up to an 8-digit number
to represent a truck's number. Truck number
is included in field begin and field end
pages and the data logger time/date string.
SPr
bAUd
1200
BAUD RATE
Used in GPS mode and data logging mode.
Selectable between 1200 or 9600 baud.
SPr
rAtE
on
RATE CHANGE ALARM ON/OFF
Turns rate change alarm ON or OFF. When rate
change alarm is selected ON; alarm sounds 4
long beeps when a rate calibration number is
changed via the serial port using a valid
change request data string.
SPr
triG
0
DATA LOGGER TRIGGER VALUE
Used in data logging mode. The trigger
determines how often actual rate data string
(See Appendix 11 for data communication
string formats) is sent to the serial port.
The trigger may be either feet [meters] or
seconds.
SPr
Unit
Ft
DATA LOGGER TRIGGER UNITS
Used in data logging mode. The trigger unit
is selectable between feet [meters] or
seconds.
SPr
dLoG
oFF
DATA LOGGER ON/OFF
Turns data logger ON or OFF.
Summary of Contents for DCS 700
Page 1: ...DCS 700 INSTALLATION AND SERVICE MANUAL ...
Page 3: ......
Page 4: ...Manual Rev B DCS 700 063 0171 711 7 99 016 0159 775 ...
Page 61: ...NOTES ...
