![background image](http://html.mh-extra.com/html/raven/dcs-700/dcs-700_installation-and-service-manual_789028036.webp)
32
b)
Depress
to advance to AUDIBLE ALARM ON/OFF.
c)
Depress
to advance to MISCELLANEOUS SCREENS.
NO SPEED ALARM
This sounds if the MASTER switch is ON, the RATE knob is on 1-10, and
there is a no ("0") speed detected.
a)
The NO SPEED ALARM is 3 beeps followed by an 8 second pause which is repeated
continuously.
b)
The alarm light will follow in sequence.
NOTE: When operating in P valve mode the console has an automatic zero speed shut
off feature. The NO SPEED ALARM will sound in this case. The alarm will
discontinue when vehicle begins moving.
CAUTION: Do not rely on zero speed shut off when performing maintenance on
vehicle. A stray speed signal could suddenly turn the system on, especially
when a radar speed sensor is being used.
SPEED LIMIT ALARM
This sounds when the programmed maximum application speed is exceeded
(See OTHER CONSOLE FEATURES).
a)
This alarm sounds a constant beep and flashes the alarm light.
b)
Slowing vehicle speed will clear this alarm.
c)
This alarm can be disabled by turning the calibration key to the
horizontial position and entering a "0" in the SPEED LIMIT KEY.
LOW TANK ALARM
This sounds when the VOLUME/GRAN or VOLUME/LIQ reaches the programmed alarm
level (See OTHER CONSOLE FEATURES).
a)
This alarm sounds eight (8) beeps every 15 seconds. The console
automatically displays "LEuL" in the GRAN or LIQ display screen depending
on which material has reached the alarm level.
b)
Depress VOLUME/GRAN or VOLUME/LIQ key for 5 seconds until DATA display
flashes and enter a "0" to disable this feature.
Summary of Contents for DCS 700
Page 1: ...DCS 700 INSTALLATION AND SERVICE MANUAL ...
Page 3: ......
Page 4: ...Manual Rev B DCS 700 063 0171 711 7 99 016 0159 775 ...
Page 61: ...NOTES ...