![background image](http://html.mh-extra.com/html/raven/dcs-700/dcs-700_installation-and-service-manual_789028021.webp)
17
begins to decrease. Depress
to slowly increase the vol/min until
the maximum vol/min is noticed, then increase offset value displayed in
the DATA display by an additional 10.
d)
After desired offset value is set, depress
. HIGH OFFSET is now
set.
e)
Depress
to advance to PRE-WET LOW OFFSET.
6)
PRE-WET LOW OFFSET
a)
GRAN display will show "oFS". LIQ display will show "PrLo". DATA display
will show "2".
b)
Depress
.
c)
Depress
and the liquid pump will stop running. The vol/min of
the liquid and "PrLo" will alternately be displayed in the LIQ display.
Depress and hold
until the pump starts running. Use
to
slowly decrease the vol/min until "0000" is displayed, then decrease
offset value displayed in the DATA display by an additional 10.
d)
After desired offset value is set, depress
. LOW OFFSET is now
set.
e)
Depress
to advance to SPINNER HIGH OFFSET.
2.
CALCULATING "SPEED CAL"
1)
Depress
until the GRAN display shows "CAL". The LIQ display will show
"SPEd". DATA display will show "on" or "oFF".
2)
Momentarily depress
to turn CAL speed "on".
3)
Depress
.
Summary of Contents for DCS 700
Page 1: ...DCS 700 INSTALLATION AND SERVICE MANUAL ...
Page 3: ......
Page 4: ...Manual Rev B DCS 700 063 0171 711 7 99 016 0159 775 ...
Page 61: ...NOTES ...