20
7 SIP Channel
7.1 How to Associate an Analog Channel with a SIP Account
In this example we will have an 8-port blade using the Pyra firmware and a dedicated SIP server. The 8-
port blade will have an IP address of 192.168.101.65 and the SIP server will have the 192.168.101.100 IP
address. The blade and the SIP server need to be on the same network in order for it to register. The EXT
for this SIP will be 1234
.* It is assumed the EXT 1234 under the SIP server is already setup and is ready
to connect to this blade. The analog channel will be unable to initiate a SIP call, but an external device
connected to the same SIP server such as a SIP phone or Raven’s IP D
eskset can start a call*.
1.
Navigate to the “
Channel Setup
” page on the left side panel and it will look like Figure
7-1.
Figure 7-
1: “Channel Setup” web interface.
2.
Type the name of the SIP channel.
3.
Select “SIP Channel” under Channel Type and click “Create”.
4.
A pop-
up will appear labeled “Account Configuration” as seen in Figure
7-2. Fill out the SIP
settings:
