ERVICE
S
32
6823346-R3
FK0346.eps
FK0347.eps
To locate the load cells for
calibration procedures, feel
under the fork arm where the
load cell is overlapped by
the flex joint.
Fork number is
found on the wire
harness receiver.
Position A
Position B
Position C
Position D
Mark locations with
removable ink or similar
Load Cell
Load Cell/Flex Joint
Capscrews.
This is the position
to mark on top of the
fork shoe.
Flex
Joint
• Logistics iForks –
Locate hidden load cells.
NOTE:
Load cell positions are the same as the standard
iForks.
To Fork Tip
Fork 1
Position A (near fork shank)
Position B (toward fork tip)
Fork 2
Position D (near fork shank)
Position C (toward fork tip)
Load cell positions can
be found where fork shoe
capscrews are located,
as shown.
3.2-2
Prior to Calibration
• Determine which fork is Fork 1 and Fork 2. For each is
assigned a load cell (corner) position.