25
6823346-R3
ERVICE
S
Parameter
Number
Function
Software
Version
Default Settings
Available Setting Options
EU
US
90
Default settings without changing
calibration
2.15 & before
Reset current parameter settings to
default (factory) settings.
NOTE:
Calibration settings will not
change.
2.18
91
Default settings with changing
calibration
2.15 & before
Reset current parameter and calibration
settings to default (factory) settings.
Refer to Section 3.1-6
2.18
92
A
Recall stored settings calibration
2.15 & before
View (recall) current calibration settings.
Refer to Section 3.1-4.
Convert calibration settings when
Parameter 1 has changed. Refer to
Section 3.1-5.
2.18
93
A
Read out last 10 error messages
2.15 & before
Read out last 50 error messages with
timestamp
2.18
NOTE:
Actual registration of the 50 er-
ror messages with timestamp the date
and time must be set first.
94
A
Back up initial parameter settings and
calibration (factory use only)
2.18
00000
00000
NOTE:
This is password protected.
95
A
Factory use only
00000
00000
96
Printout parameter setup
Pr-C1
Pr-C1
Pr-C1, Pr-C2
97
Key Test Function (buzzer and nr)
98
Scale ID number
1
1
0 – 9999
99
Software version
2.XX
2.XX
A
Some software versions may not offer this parameter.
3.1-3
Parameter Table
(continued)
