INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 43 of 64
18.0 WEIGHTS HIDDEN BEHIND
SPOKES MODE
Adhesive correction weight positioning may not look at-
tractive on some types of rims. In this case, the "weights
hidden behind spokes" mode can be used. This splits
any correction weight on the outer side into two parts
to be hidden behind the rim spokes. It can be used in
both Static or ALU-S modes.
Proceed to display the static or ALU-S unbalance meas-
urements by performing a spin (see
Fig. 82
).
Fig. 82
Total inner weight
Total outer weight
ALU-S and/or Static unbalance
Once the unbalance values have been determined,
press the “F2 key” corresponding to the icon
; at this point, the next row of keys is displayed on the
monitor (see
Fig. 83
).
Fig. 83
Press the “F3 key” relating to the weights hidden behind
spokes mode
.The program will display the
screen page in
Fig. 84
.
Move any spoke up to 12 o' clock (in many cases, the
position could already be behind or near one of the
spokes) and press the “F4 key” to confirm and con-
tinue.
Fig. 84
1
2
KEY
1 – Return to previous screen page (RED) (F1)
2 – Confirm spoke positioning at 12 o' clock
(GREEN) (F4)
Enter the number of spokes existing on the wheel, us-
ing keys F2 and F3 (see
Fig. 85
).
A minimum of 3 spokes and a maximum of 12 can
be entered.
Press the “F4 key” to confirm and continue.
Fig. 85
1
4
KEY
1 – Return to previous screen page (RED) (F1)
2 – The number of spokes increases (YELLOW) (F2)
3 – The number of spokes decreases (BLUE) (F3)
4 – Confirm number of spokes (GREEN) (F4)
2
3
The machine automatically calculates weight position
in two positions hidden behind the spokes.
1297-M010-0_R
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
