GB
Page 34 of 64
INSTRUCTION, USE AND
MAINTENANCE MANUAL
The STATIC 1 function is a procedure that offsets wheel
vibrations using a single adhesive weight on a single
plane positioned exactly at 12 o’ clock.
Enter the measurements (see par. 15.1) and proceed
as described in par. 15.3.1 Dynamic balancing (only
for wheel inner side).
The STATIC 2 function is a procedure that offsets wheel
vibrations using a single weight with clip on a single
plane positioned exactly at 12 o’ clock.
Enter the measurements (see par. 15.1) and proceed
as described in par. 15.3.1 Dynamic balancing (only
for wheel inner side)
The ALU 1 function permits balancing wheels with
light alloy rims by fitting adhesive weights on the outer
and inner sides of the rim (the inner weight is at 12
o’ clock).
Enter the measurements (see par. 15.1) and proceed
as described in par. 15.4.1.
The ALU 2 function balances wheels with light alloy
rims by fitting adhesive weights on the outside and
inside of the rim. The position of the outer weight is
not visible but hidden inside. Enter the measurements
(see par. 15.1) and proceed as for dynamic unbalance.
The ALU 3 function is a procedure that uses mixed
weights to offset wheel unbalance: weight with clip on
inner side of wheel, adhesive weight on outer side, not
visible because inside the rim.
Enter the measurements (see par. 15.1) and proceed
as for dynamic unbalance.
The ALU 4 function is a procedure that uses mixed
weights to offset wheel unbalance: weight with clip
on inner side of wheel, adhesive weight on outer side.
Enter the measurements (see par. 15.1) and proceed
as for dynamic unbalance.
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
1297-M010-0_R
