Rauch AXIS-M 20.2 EMC, Instruction Manual

Page: 165 / 236

Spreading operation
145
B
AXIS
AXIS
20.1
AXIS
30.2, AXIS 40.2
Spreading application higher on
one side than the other.
Hopper empties unevenly during
normal spreading. Fertiliser bridging above the agitator

Remove fertiliser until the height of the protective grid on
the affected side.

Break up accumulated fertiliser with a wooden stick
through the bars of the protective grid.
Outlet blocked

See blockages of the metering openings
Defective agitator

Remove fertiliser until the height of the protective grid on
the affected side.

Open the metering slide and break up accumulated fertil-
iser with a wooden stick through the bars of the protective
grid so that the remaining fertiliser can run out of the out-
let.

Check the functionality of the agitator drive. See chapter
9.8: Checking the agitator drive, page 202 .
Metering slide set incorrectly

Empty the hopper of remaining fertiliser.

Check metering slide setting. See the chapter on mainte-
nance of the respective machine type.
Irregular fertiliser feed to spread-
ing disc Fertiliser bridging above the agitator

Remove fertiliser until the height of the protective grid on
the affected side.

Break up accumulated fertiliser with a wooden stick
through the bars of the protective grid.
Outlet blocked

See blockages of the metering openings
Defective agitator

Remove fertiliser until the height of the protective grid on
the affected side.

Open the metering slide and break up accumulated fertil-
iser with a wooden stick through the bars of the protective
grid so that the remaining fertiliser can run out of the out-
let.

Check the functionality of the agitator drive. See chapter
9.8: Checking the agitator drive, page 202 .
Spreading discs are fluttering.

Check cap nuts for tight fit and check threads.
Fault Possible cause/action
K
D
R
C
Q
W
EMC