Rauch AXIS H EMC Series, Instruction Manual

Page: 76 / 132

Commissioning 7
70
Figure 7.22: Layout of the collecting vessels

Make sure that the collecting vessels are placed on level ground. Collecting
vessels set at an angle can cause measuring errors (see image above).

Carry out the calibration test (see chapter B.6 of the corresponding machine
type).

Adjust and fix the metering slides on the right and left-hand side (see chapter
B.4 of the corresponding machine type).
Run the spreading test with the determined open position for operation:

Forward speed: 3 to 4 km/h .

Open the metering slide 10 m in front of the collecting vessels.

Close the metering slides approx. 30 m behind the collecting vessels.
NOTICE
If the quantity collected in the collecting vessels is insufficient, repeat the run.
Do not change the adjustment of the metering slides.