Commissioning
45
7
7.3.2
Attachment
The machine is installed at the three-point linkage (rear power lift) of the tractor.
The lower coupling points on the machine which are meant for the lower links
of the tractor should be used o
nly in exceptional circumstances
in late fer-
tilising. See
7.4: Presetting the mounting height, page 49
.
Figure 7.2:
Mounting position
n
DANGER
Danger to life due to inattention or faulty operation.
There is a crushing hazard that may result in fatal injury for per-
sons standing between the tractor and the machine when the trac-
tor approaches or the hydraulic system is actuated.
The tractor may brake too late or not at all because of inattention
or faulty operation.
Ensure that nobody is present in the hazard zone between
the tractor and the machine.
NOTICE
For normal fertilising and late fertilising,
always
use the
upper coupling points
of the machine. See
Summary of Contents for AXIS H EMC Series
