Rauch AXIS H EMC Series, Instruction Manual

Page: 107 / 132

Maintenance and repair
101
9
9.5 Machine cleaning
We recommend cleaning the machine with a light jet of water immediately after
every use in order to maintain the value of your machine.
To facilitate cleaning, the protective grids in the hopper can be folded up (see
chapter
9.6: Opening the protective grid in the hopper, page 102 ).
The following instructions must be observed for cleaning:

Clean the outlets and the area of the slide guide from below only.

Only clean oiled machines at washing points fitted with an oil separator.

When cleaning with high-pressure water, never aim the jet directly at warning
signs, electrical equipment, hydraulic components, and sliding bearings.
9.5.1 Cleaning

Clean the machine with a soft jet of water .

Take particular care when cleaning hydraulic components like the control
block, hose screw connections or the transmission unit.
9.5.2 Care
After cleaning, we recommend treating the dry machine, especially the coated
spreading vanes and stainless steel parts and hydraulic components like
the control block, hydraulic hoses and transmission unit with an environmentally
friendly anti-corrosion agent.
A suitable polishing kit can be ordered from authorised dealers for use in treating
rust spots.