3. TROUBLESHOOTING
52
a)Cleansing/ Installation
：
Check the oil tube for damage and leaking.
Fill the fuel into the container.
Remove the bolt (M6×25)
，
washer(
Φ
6×
Φ
25×2)
，
bush
，
fuel tank rubber gasket
.Remove the fuel tube, screw the strainer bolt off. Remove the fuel tank.
Clean the fuel tank and dry it completely.
After Cleaning, install the strainer on the fuel tank and connect the fuel tube.
Check for leaking.
Install the bolt(M6×25)
，
washer(
Φ
6×
Φ
25×2)
，
bush
，
fuel tank rubber gasket
．
b) NOTICE
Check fuel tank cover vent for blocked
；
Check the fuel strainer for clogged or broken
；
Check the fuel hose for aging or cracks
；
If finding trouble, replace it in time before installation.
Check the float for move
smoothly before installation.
FUEL FILLER COVER
(Make sure the vent hole is clean and
unclogged. Blow clean if necessary)
FUEL STRAINER
（
Make sure the filter is
not clogged and damaged
）
SCREW(M5
×
12)
OIL LEVELER
GASKET
OIL LEVELER
