3. TROUBLESHOOTING
29
IGNITION COIL
FLYWHEEL
CLEARANCE
0.4-0.6mm
3-4-2 Flywheel
a)
Remove the fuel tank, air cleaner,
carburetor and recoil starter assy.
b)
Measure the clearance between the
ignition coil and flywheel with the feeler.
c)
Adjust the clearance of the ignition and flywheel.
d)
Adjusting method: Loosen the bolt and move the ignition coil up and down for adjusting
the clearance, then, screw down the bolt.
STOP ENGINE WIRE
NUT M14
STARTING CUP
IMPELLER
FLYWHEEL
BOLT (M6×25)
IGNITION COIL
SPARK PLUG CAP
HIGH VOLTAGE IGNITION LINE
(Check the insulator for damage, if
damaged, please replace it)