3. TROUBLESHOOTING
28
GROOVE
CUTOUT
②
Hang the side hook of the recoil starter spring in the
groove of the recoil starter case, set the recoil starter spring
into the case with counterclockwise rotating starter spring.
③
Set the recoil starter spring outside hook into the groove of
the recoil starter pulley.
④
Set the starter drive cam on the recoil starter pulley, and
install the return spring on the recoil starter pulley while
hooking it on the side of the driving cam.
⑤
Install the spring, drive guide and fixing screw in order.
⑥
Reel off the rope from the recoil starter , pass
the gasoline engine outer cover and recoil starter
handle, and then make a figure-eight knot at the
rope end.
⑦
Pull the recoil starter rope lightly to check the
drive cam for function.
