Rational MI 2066, Modification Instruction

Page: 6 / 168

1 | MI_2066: Removal and Installation Harness Thermocouples
6 / 168 MI_2066_Removal_and_Installation_Harness_Thermocouples
MI_2066_Removal_and_Installation_Harness_Thermocouples
a
The pan is raised.
a
The bottom of the pan cover has been removed.
1. Perform the following steps for the appropriate thermocouple.
2. Connect the cable to the I/O board.
3. Guide the cable through the pan axis.
4. Hang the thermocouple in the retaining spring.
5. Tighten the 2 nuts of the retaining spring with a torque of 4 Nm.
6. Fasten the cable together with the other cables with a temperature-resist-
ant cable tie.
>>
The thermocouples have been installed.
Closing the control panel
1. Proceed in reverse order to the step Opening the control panel.
Mounting the pan cover
1. Proceed in reverse order to the step Removing the pan cover.
NOTICE
Allocation is only necessary if several thermocouples have been exchanged.
Performing the allocation
a
The unit is connected to the mains.
a
The unit is switched on.
1. Perform an allocation via the service level, in order to assign the thermo-
couples to the correct heating elements.
>>
The allocation is complete.