Rational MI 2066, Modification Instruction

Page: 9 / 168

2 | MI_2066: Removal and Installation Harness Thermocouples
MI_2066_Removal_and_Installation_Harness_Thermocouples 9 / 168
MI_2066_Removal_and_Installation_Harness_Thermocouples
NOTICE
Damage to the cable trunk and the control panel when removing the control
panel
The control panel is connected to the installation compartment by a cable
trunk.
Remove the control panel carefully in order not to damage the cable trunk.
Put down the control panel carefully and protect it against scratching.
a
The unit is disconnected from the power.
1. Open the electrical compartment, as described in the original installation
manual for the unit iVario Pro L / XL in section 6.2 Opening the electrical
compartment.
2. Open the flap of the console panel and remove the 2 screws (1)
3. Remove the control panel. Place some protection on the surface, e.g. a card-
board box or bubble wrap, to protect the control panel against scratching
and damage (2).
4. Remove the 2 screws on the bottom of the unit (3).
2
1
3
5. Remove the hand shower (4). Unroll the hand shower hose and secure it be-
fore rolling it up.
6. Pull the console panel forward, so that you can remove the side panel.