Rational MI 2066, Modification Instruction

Page: 3 / 168

Modification Instruction
66 / 2020
MI_2066: Removal and Installation Harness Thermocouples
iVario 2-XS /
iVario Pro
2-S
30 min.
torque wrench
(4 Nm)
30.11.2020
3 / 168
MI_2066_Removal_and_Installation_Harness_Thermocouples
1 MI_2066: Removal and Installation Harness Thermocouples
General information
This section describes the retrofitting for unit sizes 2-XS and 2-S. The retrofit-
ting for unit sizes L and XL can be found in the next section.
The illustrations in this manual are examples only and may differ from the unit.
NOTICE
Removal and Installation Thermocouple B201 or B211
Note that different retrofitting instructions are required for the removal and
installation of the thermocouple B201 or B211.
n
Read the retrofitting instructions MI_2062: Removal and Installation
Thermocouple B201/B211
Required component
All or only individual thermocouples can be installed.
Component: Article number:
Harness iVario 2-XS 40.05.930P
Harness iVario Pro 2-S 40.05.931P
Individual thermocouple 87.00.339
Required tool
A torque wrench with a torque of 4 Nm is required for the installation of the
thermocouples. Use the manufacturer's torque wrench (article no.: W24001).
Removing the pan cover
a
The unit is switched on.
1. Raise the pan electrically.
2. Turn off the unit.
3. Switch off the power supply to the unit.
4. Remove the 5 screws on the bottom of the pan cover (1).